Bundle Of 24 5M Road Line Markings Thermoplastic Bundle of 24 PRE-FORMED THERMOPLASTIC ROLLS

Regular price £289.99
Sale price £289.99 Regular price
Unit price
ex. VAT
Yellow
White
Ask a question

Ask a Question

* Required fields

Size guide Share
This is a Bundle of 24 pre-formed thermoplastic rolls. Choose which colour you would like.

Pre-formed Thermoplastic Rolls are a fast, permanent reinstatement solution for road markings available in both white and yellow. They were designed for quick application on
roadways, warehouses, pavements, car parks or any other heavily trafficked areas.

Application
Clean application area thoroughly by removing all sand, dirt, chemicals and oily substances.

Using a suitable propane torch, remove any moisture present and pre-heat the area prior to treatment. Use Probit Bitumen primer on non asphaltic and aggregate rich surfaces. Probit Mex Prime can be used where a black coloured primer is unacceptable.

Remove the packaging and carefully place the Pre-formed Ther- moplastic Tape onto the prepared surface with the glass coated top facing up. Position the tape as accurately as possible and cut to size.

Heat the Pre-formed Thermoplastic Tape using a suitable propane torch keeping the flame approximately 20-40 cm from the tape. Do not concentrate the heat in one area and heat with an even sweeping action. Heat until the tape starts bubbling and flowing
into the road surface.Special care needed when handling at surface temperatures below 12°C. We would recommend that heat is applied to bring the surface up to temperature prior to application. 
Do not drop and handle with due care. Store in a warm place before handling.
Pre-warm all markings before removing from packaging. Rough handling will lead to material damage. Correct handling procedure and pre-warming will allow the markings to remain flexible and will prevent cracking when being handled.
Our high quality pre-formed thermoplastic marking materials may be less flexible in colder conditions.

We strongly recommend:

The Pre-formed Thermoplastic Tape should cool and harden within 5-10 minutes. When cooled, examine the tape and test by trying to lift. If areas do lift, repeat step

Performance
Colour: White or Yellow
Roll Length: 5 metre
Width: 100 mm
Pre-formed Thermoplstic Rolls meet the following International standards: BS EN 1790,
BS EN 1436, BS EN 1871, AASHTO and FHWA.
BASt certification at P7 level of 4 million wheel-overs.
Pre-formed Thermoplastic Rolls comply with the relevant specification requirements for
retroreflectivity value (where specified), skid resistance and luminance values.
Bundle Of 24 5M Road Line Markings Thermoplastic Bundle of 24 PRE-FORMED THERMOPLASTIC ROLLS

Bundle Of 24 5M Road Line Markings Thermoplastic Bundle of 24 PRE-FORMED THERMOPLASTIC ROLLS